UHPC ADD-ON

YOUR Raw MATERIAL +

ADD ON = UHPC

 

Based on your own raw materials and our ADD ONplus technology you can produce a cost-effective and high quality UHPC.

 

ADD ONplus increases packing density, improves processability and increases mechanical strength.

 

Here the ADD ONplus share of your UHPC, depending on your raw materials, is low and lies between 6% and 15%.

 


ADVANTAGE

  • Cost reduction of UHPC
    (between 15% and 30% compared to ready mixes)
  • Increase in packing density
  • Easier processing
    (reduction of superplasticizer possible)
  • Increased mechanical properties (compression and flexural strength)
  • Stable product quality
    (no raw material fluctuations)
  • Reduction of expensive raw materials,
    such as silica.
  • You receive an initial formulation: Required raw materials + ADD ON

SERVICE

With the ADD ON you receive a recommendation for the UHPC recipe. This allows you to produce the UHPC yourself and make adjustments (e.g. pigments, fibers, .....).

 

 

Optionally, we can offer you assistance with the implementation or even develop your material, if you wish.

 

Our additional offer: Should you wish a development, we will charge you a minimum purchase of 30%.

EXAMPLE

 

With an 6% amount of ADD-ON you create a concrete volume of approx. 6.67 m3 UHPC with 1000 kg ADD ON.


add-on calculator:

Enter the volume of UHPC you want to produce (in m³):

The estimated add-on weight with 15% Add-On (in tons) is: